Oki MICROLINE Turbo ML390 Service Manual Download

Page: 173 / 276

YES End of procedure.

NO Go to D

Are the control board contacts and the power supply board contacts properly made?

NO Properly make the contacts.

Is the problem resolved?

YES End of procedure.

NO Go to E

YES Go to E

Replace the connector between the power supply board and the control board.

Is the problem resolved?

YES End of procedure.

NO Replace the power supply board.

Is the problem resolved?

YES End of procedure.

NO Contact Technical Support.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for MICROLINE Turbo ML390






































































































































































































































Search results

Summary of Contents for MICROLINE Turbo ML390

Reviews:

Related manuals for MICROLINE Turbo ML390

Brands by name

Popular brands

Oki MICROLINE Turbo ML390, Service Manual

Search results

Summary of Contents for MICROLINE Turbo ML390

Reviews:

Related manuals for MICROLINE Turbo ML390

Brands by name

Popular brands