Oki MICROLINE Turbo ML390 Service Manual Download

Page: 20 / 276

· Dimensions

Maximum: 5 inches x 8 inches

1.3.09 Labels

NOTES:

Labels should be used ONLY with bottom feed.

Do NOT use fabric labels.

Do NOT print on the edge or perforation of the label.

· Carrier Width

Maximum: 8.5 inches (216 mm) Microline 390/390-Plus

Maximum: 15 inches (381 mm) Microline 391/391-Plus

· Thickness

Maximum: 0.011 inches (0.28 mm)

1.3.10 Transparencies

· Thickness

Maximum: 0.004 inches (0.10 mm)

· Dimensions

Maximum: 8.5 inches wide x 11 inches long (216 mm x 260 mm)

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for MICROLINE Turbo ML390






































































































































































































































Search results

Summary of Contents for MICROLINE Turbo ML390

Reviews:

Related manuals for MICROLINE Turbo ML390

Brands by name

Popular brands

Oki MICROLINE Turbo ML390, Service Manual

Search results

Summary of Contents for MICROLINE Turbo ML390

Reviews:

Related manuals for MICROLINE Turbo ML390

Brands by name

Popular brands