ML1120
Plus
/ML1190
Plus
User’s Guide - Operating instructions > 46
B
uttOns
Button
StatuS
FunctIon
SEL
On-line
Sets the printer to off-line.
Off-line
Sets the printer to on-line and disalarms
the printer.
LF/FF
On-line and off-line
Feeds paper by one line. Holding the
button down results in continuous form
fed until first line of next page.
LOAD/EJECT
On-line and off-line
Continuous Forms
mode
Feed paper if it is not fed.
If the continuous form is in position, press
to retract the form to the Pin Tractors.
(If the sprocket holes of the last page of
the form disengage from the sprocket
pins, do not attempt to eject the paper as
a paper jam may result.)
On-line and off-line
Cut sheet manual mode
Ejects the cut sheet
TEAR
On-line and off-line
Continuous Forms
mode
Delivers the continuous form to the cut
position. If the button is pressed again or
data is received, the original form position
is restored.
On-line and off-line
Cut sheet manual mode
Ineffective
SEL+POWER
ON Switch
Enters menu mode.
LOAD/
EJECT+SEL
On-line and off-line
Microfeed down 0.18 mm (1/144 in)
for ML1120
Plus
and 0.14 mm (1/180 in) for
ML1190
Plus
step.
LOAD/
EJECT+LF/FF
On-line and off-line
Microfeed down 0.18 mm (1/144 in)
for ML1120
Plus
and 0.14 mm (1/180 in) for
ML1190
Plus
step.
TEAR+SEL
On-line and off-line
Microfeed down 0.18 mm (1/144 in)
for ML1120
Plus
and 0.14 mm (1/180 in) for
ML1190
Plus
step at tear-off position only.
TEAR+LF/FF
On-line and off-line
Microfeed down 0.18 mm (1/144 in)
for ML1120
Plus
and 0.14 mm (1/180 in) for
ML1190
Plus s
tep at tear-off position only.
SEL+TEAR
On-line and off-line
Quieter print mode
Each press of the button pair progresses
the printer through Quieter print mode
> High multipart print mode
> Normal print mode
(Effective only for ML1120
Plus
)
