6
Configuring Your Print Server
Using OKI’s ExtendView Utility to Configure Your IP Address
First, download the ExtendView utility from OKI Data’s website at
http://www.okidata.com
– navigate to the
page for your specific product, then click on
Drivers
, then
Utilities
,to locate the software.
Next, install the ExtendView utility and launch the application.
1. In the ExtendView utility, highlight the device you are going to configure.
2. Choose the configuration option from the dropdown menu.
3. From the Server Configuration box, click Set Permanent. Then, if you
wish to change the IP address, Subnet Mask and Default Gateway, you
may do so.
When the desired options have been set, click OK. The Print Server
will automatically be reset at this point, and your options will have
been saved.
(If you have network configuration questions, please contact your
network administrator.)
Proceed to the instructions for Installing Your Driver.
