1: English
Installation Instructions
OkiLAN
®
7120e
OKI, OkiLAN ® Oki Electric Industry Company, Ltd.
Ethernet ® Xerox Corp.
Notes:
This print server is FCC and IC Class A
compliant.
No Ethernet
®
cable is supplied. Use an
Ethernet cable with two twisted wire pairs
and an RJ45 plug.
1. Turn off the printer and unplug the power cord.
2. Remove the screws (
1
) at either end of the
mounting bracket on the back of the printer.
3. Slide the bracket out of the printer.
4. Remove the snap-out plastic piece (
1
) from the
mounting bracket.
5. Note the plastic release clip (
1
) and the metal
spring (2) on the mounting bracket.
6. Position the print server under the plastic
release clip (
1
) and over the metal spring (
2
)
and slide it into the mounting bracket until you
hear it click into place.
7. Insert the bracket/card into the printer. Push in
firmly.
Make sure you feel the connection pads
(
3
, above) at the back of the print server plug
into the printer.
8. Reinstall the screws on the bracket.
9. Press the SW button (
1
) on the print server.
The test pages print.
10.
Connect your Ethernet cable to the print server,
then to the network
.
