OkiLAN 7120e Network User’s Guide
64
# smit mkrque
b. Select [remote] (the printer connected to the remote host) from
[Type of connection].
c. Select [Standard procedure] from Type of remote print.
d. Carry out the following settings in [Add a standard remote print
queue]. If the configuration differs from below, configure
according to environment.
Example: Use port lp with print queue ML8810_lp and print server
ML8810
Queue to be added“ML8810_lp”
Host name of the remote server“ML8810”
Queue name of the remote server“lp”
Type of print spooler
of the remote server“BSD”
Description of printer name
of the remote server“Optional comment”
LPD Printing
Line Printer Daemon (LPD) is the most common protocol for printing with
TCP/IP to a network printer. Refer to the workstation’s manual for details
of
lpr
and
lp
commands. The following explanation in this section uses the
printing of print file
test.prn
with printer name
ML8810_lp
as an example.
Logical printers
The OkiLAN 7120e includes three logical printers.
>
lp
must be used for printing a file created using the printer driver.
>
sjis
must be used for printing a text file of Shift JIS Kanji code.
>
euc
must be used for the printing a text file of the EUC Kanji code.
>
sjis
and
euc
function only as PostScript printers.
BSD-based UNIX
Print using the
lpr
command.
# lpr –PML8810_lp test.prn
If the
lprm
command is used, the print job is cancelled.
Logical printer
Printer function
lp
For direct output
sjis
For Shift JIS Kanji converted output
euc
For EUC Kanji converted output
Summary of Contents for ML8810n
Page 1: ......
