manualshive.com logo in svg

Oki OKIFAX 5700, Maintenance Manual

The Oki OKIFAX 5700 is a reliable fax machine that streamlines communication needs for businesses. Ensure its longevity and optimal performance with the Maintenance Manual. Download this essential manual for free from our website, providing step-by-step instructions and tips to keep your OKIFAX 5700 running smoothly. Visit 88.208.23.73:8080 for hassle-free access.

Share
Download
background image

OKIFAX 5700/5900

H - 1

1.

Notes to RMCS user

1.1

Introduction

RMCS stands for the Remote Management Center System.
RMCS refers to setting registration data and conducting maintenance operations from a
remote location.
The purpose of this system is to speed up customer service and reduce maintenance costs.
This system doesn't work on Windows.  Don't activate it on Windows.  This system work only
on DOS.

1.2

System Composition of RMCS MODEL 30

System composition of RMCS Model 30 is shown as below.
PC, FAX MODEM and RS232C cable are necessary for RMCS MODEL 30.  Please prepare
them with the user.
At first, install a SYSTEM DISC and FAX DISC's in the PC to use RMCS.

(1) PC

:

IBM PC/AT compatible

(2) FAX modem

:

This is a equipment to call and communicate to the remote FAX
machine.  We recommend "Modem SURFR 56k (MOTOROLA)" for
this system.

(3) RS232C cable

:

The straight type cable to connect serial port between PC and FAX
modem.

(4) SYSTEM DISC

:

This disk is used to install this system and FAX DISC's to PC.
SYSTEM DISC for Model 30 can be use for Model 10 and 20.

(5) FAX DISC

:

This software includes default data and communication control
program etc. for the model of FAX machine.  Therefore, this disc
exists for the model of FAX machine one by one.

Fig. 1.1  System composition of RMCS Model 30

Summary of Contents for OKIFAX 5700

























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for OKIFAX 5700

Panasonic Workio DP-3510 Information Sheet preview
Workio DP-3510
Brand: Panasonic Pages: 12
Canon NP-2120 Service Manual preview
NP-2120
Brand: Canon Pages: 207
Mita PointSource Ai 3010 Service Manual preview
PointSource Ai 3010
Brand: Mita Pages: 478

Brands by name

Popular brands

Load more brands