manualshive.com logo in svg

Oki OKIFAX 5700, Maintenance Manual

The Oki OKIFAX 5700 is a reliable fax machine that streamlines communication needs for businesses. Ensure its longevity and optimal performance with the Maintenance Manual. Download this essential manual for free from our website, providing step-by-step instructions and tips to keep your OKIFAX 5700 running smoothly. Visit 88.208.23.73:8080 for hassle-free access.

Share
Download
background image

OKIFAX 5700/5900

H - 4

2.4

Running RMCS

Return to drive C and to execute RMCS:

C>RMCS

enter

The operator is then required to enter their ID and password.  The ID is not critical to the
operation and is only used for the operation history.  The password must be the same as
entered during Installation of RMCS set-up.

The TEL DIRECTORY MENU is now displayed and the main options are Select User and
Register user.

Note: The user must be registered before being selected.

2.4.1 Registering user

Select 2 (Register user) from the menu and select NEW USER which is in inverse video.
Press enter and the user has to supply the following details.

<USER ID>

the name of the REMOTE fax

<TEL NUMBER>

the telephone number of the REMOTE fax

<FAX MODEL>

fax model of REMOTE fax (FX-056/176)
Press the space bar to select the model

<MEMO>

Not required, but a message can be entered

Press function key F10 to register these details.

The FAX DATA FILE LIST is now displayed and the file name 'sys_defx.9xx' should be high-
lighted, press enter to complete registration (This file name is part of the FAX DISC information
and 9xx is dependent on the model number).

2.4.2 Selecting a user

Select 1 (Select user) from the menu and USER LIST will be displayed.  Use the arrow keys to
select the required user then press enter.

The MAIN MENU will now be displayed:

1:

Initialization of FAX

2:

File [LOAD]

(Center to FAX)

3:

File [SAVE]

(Center from FAX)

4:

[EDIT]

(ON LINE)

5:

File [EDIT]

(OFF LINE)

6:

Testing

7:

Environment setting

8:

Terminate

At first it is necessary to select 'Modem settings' in 'Environment Setting' to set COMMUNICA-
TION PORT connected between PC and FAX Modem, and to set FAX Modem parameters
(TONE DIAL/PULSE DIAL, DETECT BUSY TONE, DETECT DIAL TONE, SPEAKER MODE,
SPEAKER VOLUME, FLOW CONTROL COMMAND).

Summary of Contents for OKIFAX 5700

























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for OKIFAX 5700

Oce 7055 User Manual preview
7055
Brand: Oce Pages: 68
Oce 31x5E Configuration And Maintenance Manual preview
31x5E
Brand: Oce Pages: 156
Olivetti d-COPIA200D Specifications preview
d-COPIA200D
Brand: Olivetti Pages: 2
Sharp AL-1040 Service Manual preview
AL-1040
Brand: Sharp Pages: 4
Sharp AL-1010 - B/W Laser - Copier Service Manual preview
AL-1010 - B/W Laser - Copier
Brand: Sharp Pages: 12
Sharp AL-1020 Service Manual preview
AL-1020
Brand: Sharp Pages: 30
Sharp AL-1041 - B/W Laser Printer Operation Manual preview
AL-1041 - B/W Laser Printer
Brand: Sharp Pages: 47
Sharp AL 1000 - B/W Laser Printer Operation Manual preview
AL 1000 - B/W Laser Printer
Brand: Sharp Pages: 47
Sharp AL-1000 Series Operation Manual preview
AL-1000 Series
Brand: Sharp Pages: 50
Sharp AL 800 - B/W Laser - Copier Operation Manual preview
AL 800 - B/W Laser - Copier
Brand: Sharp Pages: 51
Sharp AL-1000 Series Service Manual preview
AL-1000 Series
Brand: Sharp Pages: 93
Sharp AJ-6000 Operation Manual preview
AJ-6000
Brand: Sharp Pages: 70
Toshiba e-studio 120 Service Manual preview
e-studio 120
Brand: Toshiba Pages: 9
Toshiba e-studio 12 Operator'S Manual preview
e-studio 12
Brand: Toshiba Pages: 48
Toshiba e-studio15 Operator'S Manual preview
e-studio15
Brand: Toshiba Pages: 78
Toshiba e-studio120 Operator'S Manual preview
e-studio120
Brand: Toshiba Pages: 84
Toshiba 65/5560 Service Handbook preview
65/5560
Brand: Toshiba Pages: 75
Toshiba e-studio 120 Operator'S Manual preview
e-studio 120
Brand: Toshiba Pages: 84

Brands by name

Popular brands

Load more brands