Handbook
|
39
Programming One-Touch and 2 or 3 Digit Speed Dial Numbers
To begin programming your speed dial numbers, follow these instructions.
Collect Information
Gather the following information for each Speed Dial number you want to store:
Entry
Parameters
Explanation
1 Name
Can be up to 15 characters
Use letters, number or symbols.
2 Primary telephone number (LOC#)
Up to 40 characters
This is the main number.
3 Alternate telephone number (ALT#)
Up to 40 characters
If the main number is busy or does not answer,
the machine will automatically dial this
alternate number.
4 Communications speed
33.6K, 28.8K, 14.4K, 9.6K, 4.8K
33.6K is the default setting. If the machine you
are communicating with is an older machine,
try adjusting the speed to a lower setting.
5 Echo protection state
ON or OFF
If you are experiencing problems
communicating with a remote location in a
very noisy telephone area, or with an overseas
location, set Echo Protection to On for the
one-touch key assigned to that location.