23
4. Beginning with section #1, find the lined box where
no color shows in the spaces between the black lines
and note its corresponding number.
If more than one box has no color, select the
one closest to zero. If all the boxes have
color, select the lightest one, nearest zero.
5. The display reads
ADJUST #1
, with the number 0 on
the second line. Press
©
/Reset
to increase the number
or
§
/Recover to decrease it, until the second line reads
the number of the correct box for section #1.
6. Press the MENU 1/Menu 2 button to move to section
#2 (display:
ADJUST #2
), and repeat the process to
select the box which shows no color in the spaces
between the black lines.
7. Repeat step 6 for each of the remaining seven sec-
tions. If you need to go back, hold MENU 1/Menu 2
down to move backwards through the menu.
8. When you are satisfied with your selections, press
MENU 1/Menu 2 repeatedly until
PRINT EXECUTE
appears on the display.
9. Press the ENTER/Power Save button.
The printer prints another color test page. This time,
the box where no color shows should correspond to
box +1, 0, or -1 for each section. If it doesn’t, press
the MENU 1/Menu 2 button and repeat steps 4
through 9 until it does.
10.Press the ON LINE button to save the settings and
exit the menu.
