33
E
NERGY
S
TAR
As an E
NERGY
S
TAR
®
Partner,
Okidata has determined that this
product meets the E
NERGY
S
TAR
guidelines for energy efficiency.
Setting Power Saving Mode
In power saving mode, the heating unit has been turned
off to save energy. When data is sent to the printer, it
automatically warms up briefly before printing.
If you want to disable or change this setting:
1. Place the printer off line (press ON LINE).
2. Press POWER SAVE for two full seconds.
3. Press
©
repeatedly until you see the selection you
want.
4. Press ENTER/Power Save to set the selection as the
default. An aserisk (*) appears to indicate the new
default setting.
5. Press ON LINE to exit the menu and place the printer
back on line.
Power Saving Selections
0 SEC*
Reduces power consumption.
Immediatiately after printer stops
receiving data, fuser heating element
shuts off: 30 seconds later fan shuts off
When the printer receives data, the
fuser warms up before printing begins.
8 MIN
Reduces power consumption. Eight
minutes after printer stops receiving
data, the fuser heating element shuts
off; 30 seconds later fan shuts off.
When the printer receives data, the
fuser warms up before printing
begins.
DISABLE
Fuser and fan are always on, printer
is ready to print immediately.