40496501TH Draft Version
57
3.3.4
Power Supply Assy
(1)
Remove Guide Paper (B), Cover Blank Lower and Rear Cover (B). (See 3.3.1)
(2)
Unplug connectors to Power Supply Unit
1
.
(3)
Unscrew the screw
2
and release Earth Wire
3
.
(4)
Unscrew the screw
4
and remove Bracket PG
5
.
(5)
Unscrew 2 screws
6
. Pulling forward the protrusion on Power Supply Unit
1
and sliding it
in the arrow direction through 2 inserting positions, remove Power Supply Unit.
(6)
For installation, reverse the removal procedure.
(Note on Installation)
1. Insert the protrusion on Power Supply Unit
1
into the inserting positions on Lower Cover
7
and mount the Unit.
2. The fan should be installed, matching the direction of air flow to the direction of arrow shown
in the figure.
1
2
3
7
4
5
6
Protrusion
Air Flow
Summary of Contents for PACEMARK 4410
