- 243 -
• Notifying errors periodically via e-mail
1
Open the web page of this machine.
•
For details on how to open it, refer to
"Opening the web page" (Page 225)
.
2
Log in as an administrator.
3
Select [Admin Setup].
4
Select [Network] - [E-mail] - [Alert Settings].
5
Input the e-mail address to receive alerts in [Alert Settings].
6
Click [Settings] of the e-mail address you input.
If you want to apply the alert condition to another address, click [Copy].
7
Select [Periodically] in [Way of E-mail Alerting], and click [To STEP 2].
8
Configure the settings by following the on-screen instructions.
9
Click [OK].
10
Click [View a summary of current configuration] to check the current
settings, and click [X] to close the window.
You can also check the current settings of up to two addresses in the home window.
Select the address you want to check from the list.
11
Click [Submit].
The new settings will take effect after the network function of the machine has been reset.
•
If no alert target error occurs, the alert e-mail will not be sent.
Summary of Contents for PRO330S
