- 100 -
White dots or lines appear
Possible causes
Solution
Reference
Dry the paper as it is moist.
Use the paper stored at
appropriate temperature and
humidity.
Condensation occurs on printed paper
Possible causes
Solution
Reference
The paper is moist.
Use the paper stored at
appropriate temperature and
humidity.
This machine is used in a
place with high humidity
or sudden changes in
temperature and humidity.
Use this machine in an
environment with an appropriate
temperature and humidity.
Vertical streaks appear
Possible causes
Solution
Reference
The image drum is scratched. Please replace the image drum.
Replacing the image drum,
Pro330S User's Manual
The paper transfer path or
fuser unit is dirty due to
collection of paper dust, glue,
etc.
Clean the paper transfer path or
fuser unit.
Summary of Contents for PRO330S
