- 104 -
The entire paper is printed in black
Possible causes
Solution
Reference
The machine may have
broken down.
Please contact your dealer.
-
Nothing is printed
Possible causes
Solution
Reference
The machine may have
broken down.
Please contact your dealer.
-
White streaks occur
Possible causes
Solution
Reference
The paper is moist.
Replace with new paper.
If they occur near the
beginning of the roll paper,
the tape holding the roll
paper may have peeled off.
Cut off the front edge of the
paper to the part where there
are traces of tape, and discard
it.
The peripheral area is dirty
Possible causes
Solution
Reference
The size is not reduced by
scale according to the paper
size.
Reduce the size by scale
according to the paper size.
Keeping the page layout while
printing by scale, Pro330S
User's Manual
Summary of Contents for PRO330S
