- 41 -
2
Check that "READY TO PRINT" appears on the display.
3
Press «
∧
» or «
∨
» several times to display [ADMIN SETUP].
4
Press «OK».
5
Input the password when [ENTER PASSWORD] is displayed.
•
The default password is "999999".
6
After you have input the password, press «OK».
7
Press «
∧
» or «
∨
» several times to display [OTHERS SETUP].
8
Press «OK».
9
Press «
∧
» or «
∨
» several times to display [PRESENTER UNIT].
10
Press «OK».
11
When the setting value flashes, press «
∧
» or «
∨
» to display [ENABLE],
and press «OK».
12
The machine restarts and returns to the standby state "READY TO PRINT".
•
For details on how to print, refer to "Pro330S User's Manual".
Summary of Contents for PRO330S
