User’s Guide> 96
Low Toner
Continue
Stop
Sets the printing
operation when
insufficient toner is
detected.
Continue
: the printer
can continue printing
while remaining
online.
Stop
: the printer
stops printing and
goes offline.
Jam Recovery
ON
OFF
ON
: continues
printing the job,
including any jammed
pages, once the jam
has been cleared.
OFF
: Cancels a job
including the page
currently jammed.
Error Report
ON
OFF
ON
: prints an error
report during the
occurrence of an
internal error. This
item is valid only for
PS and PCLXL.
Print Position
Adjust
X Adjust
0.00
+0.25 – +2.00
-2.00 – -0.25
mm
0.00
+0.01 – +0.08
-0.08 – -0.01
in
Adjusts the position
of the whole printing
image (0.25 mm,
0.01 in interval)
perpendicular to the
direction of paper
movement (i.e.
horizontally).
Y Adjust
0.00
+0.25 – +2.00
-2.00 – -0.25
mm
0.00
+0.01 – +0.08
-0.08 – -0.01
in
Adjusts the position
of the whole printing
image (0.25 mm,
0.01 in interval)
parallel to the
direction of paper
movement (i.e.
vertically).
ITEM
VALUE
DESCRIPTION
Summary of Contents for proColor Pro510DW
