Issue Department
：
Bedding Division
Date
：
2021-06-28
System Instruction
Author
：
Instruction of RF5019
Edition
：
1.1
Page 3 of 5
3
/
5
current position as
LOUNGE
position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.5
Reset all memory positions to default settings
（
button 1 and 11 in figure 1
）
Pressa and hold ZG+FLAT buttons
（
button 1 and 16 in figure 2
）
for
5s, timer LED of
remote flashes, the control box reset all memory positions to default settings
；
1.6
Head up
（
button 7 in figure 1
）
Press and hold
HEAD UP button of remote, head actuator moves out, stop when
released
；
1.7
Head down
（
button 9 in figure 1
）
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released
；
1.8
Foot up
（
button 8 in figure 1
）
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
1.9
foot down
（
button 10 in figure 1
）
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released
；
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head and
foot actuators start moving;
1.10
Flat
（
button 11 in figure 1
）
Click FLAT button, the bed goes flat, stop when click any button during the process of going
flat
；
