Issue Department
：
Bedding Division
Date
：
2017-8-15
System Instruction
Author
：
Instruction of RF
5022
Edition
：
1.1
Page 3 of 7
3
/
7
Press and hold
TV/PC
button for 5s, timer LED of remote flashes, the control box records
current position as
TV/PC
position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
2.5
M2 button
（
button 5 in figure 2
）
Click M2 button, actuators move to M2 position, stop when click any button during
movement
；
Press and hold M2 button for 5s, timer LED of remote flashes, the control box records current
position as M2 position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
2.6
LOUNGE button
（
button 6 in figure
）
Click
LOUNGE
button, actuators move to
LOUNGE
position, stop when click any button
during movement
；
Press and hold
LOUNGE
button for 5s, timer LED of remote flashes, the control box records
current position as
LOUNGE
position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
2.7
Lumbar actuator
（
button 7 in figure 2
）
Press and hold LUMBAR UP button of remote, lumbar actuator moves out, stop when released
；
2.8
Childlock button
（
button 8 in figure 2
）
In unlocked state, press and hold the childlock button, the red backlight of children lock
button begins to flash, after 5s, the red backlight stops flashing, remote entersl into locked
state;
Under locked state, press any button except childlock button, the red backlight of childlock
turns on, the button you pressed is invalid;
