GERMAN
Technology
Step 5:
With the help of your able-bodied assistant , carefully lift the adjustable
bed frame and set it in place upright on its legs . Excessive pressure may
damage the legs. Remove all protective plastic covering. Note: check and
make sure that all power cords clear and do not interfere with any
Adjustable Bed Mechanisms; Dispose of covering property to avoid injury.
Step 6:
Note : The Mattress Retaining Bar is mounted upside down for shipping only .
Remove the Mattress Retaining Bar in the foot section of the bed bottom and turn
the bar upright and reinstall by carefully aligning and pushing the bar into place .
(See Figures 3 & 4. )The retaining bar is to prevent the mattress from slipping out
the base and should not be used as a handle of the base. Using as a handle will
damaged the retaining bar holders. Screws come out from the retainer bar holders
will be considered as a damaged part and not a defective part and is not covered
by the warranty.
figure 3 & 4
Step 4:
- Unplug the Power Cord.
- Install the six legs firmly into the base of the frame.
The six legs screw into the threaded holes in each
corner of the adjustable base frame. (See Figure 2).
The legs are stackable. The combination give you a set of six 4",6"or 10"legs.
- Note: The minimum leg height:4", The warranty is void if the minimum leg
height is not used.
- Do not over tighten.
figure 2
4"
6"
10"
+
6 - 12
7 - 12
Step 7:
Scan QR Code to download Free Bluetooth APP “OKIN ComfortBed II”.
( IOS & Android )
( IOS version 8.0 and above)
( Android )
How to pair the bed to APP:
Please open BLUETOOTH on your phone settings,
then open the "
OKIN ComfortBed II
" app and follow below steps:
Step1:
CHOOSE
“3M”
Step2:
TOUCH
“H”
Step3:
Click
“Setting”
Step4:
Select the device named
“OKIN-xxxxxxx”
the APP will be connected and says
“connect success!”
APP Functions
GERMAN
Technology
