DDR-04 / DDR-08-1U / DDR-16-1U User’s Manual
R201302-V08
15
Setup mask area:
click Setting button, enter into live image to press left mouse and drag mouse to set mask area, refer to
below picture. Click Apply button to save the setting.
Delete mask area:
select a certain mask area, click left mouse to delete that mask area, click Apply button to save the
setting.
Setup mask area
Notice: The mask area will not be recorded on DVR. Please use this function carefully.
Live image mask area
4.3 Record configuration
Record configuration includes five sub menus: enable, record bit rate, time, recycle record and stamp.
4.3.1 Enable
Step1: enter into system configuration
record configuration
enable; refer to Fig 4-11:
Fig 4-11 record configuration-enable
Step2: tick off record, audio and record time
Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit
current interface.
Definitions and descriptions of Record:
Parameter Meaning
Record
Record switch of every channels
Audio
Enable live record audio
