DDR-04 / DDR-08-1U / DDR-16-1U User’s Manual
R201302-V08
17
Expire time:
the hold time of saved records. If the set date is overdue, the record files will be deleted automatically.
Step2: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit
current interface.
4.3.4 Stamp
Stamp
：
User can overlap the channel name and time stamp on video.
Step1: enter into system configuration
record configuration
stamp; refer to Fig 4-13:
Fig 4-13 record configuration-stamp
Step2: tick off camera name, time stamp; click Set button, user can use cursor to drag the camera name and time
stamp in random positions, refer to below Figures:
Before drag after drag
Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit
current interface.
4.3.5 Recycle
record
Step1: enter into system configuration
record configuration
recycle record;
Step2: tick off recycle record, the recycle record function will enable, it will cover the earlier recorded files and keep
recoding when HDD is full; if disenable this function, it will stop recording when HDD is full.
Step3: click “default” button to reset default setting; click “apply” button to save the setting; click “exit” button to exit
current interface.
