DDR-04 / DDR-08-1U / DDR-16-1U User’s Manual
R201302-V08
34
If users want to utilize dynamic domain name, need apply for a domain name in a DDNS server supported by the DVR
or router. Then add to the DVR or router.
Now this unit only supportswww.dns2p.com
，
www.88IP.net
，
www.meibu.com
，
www.dyndns.com
，
and
www.no-ip.com
About the router, please check in the router manual.
Step5: Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is not 80, add the port
number after IP address or domain name.
Step6: IE will download ActiveX automatically. Then a window pops up and asks for user name and password.
Step7: Input name and password correctly, and enter to view.
Notice: If you cannot download and install ActiveX, please refer to 0
2. Connect the DVR to internet directly.
Step1: Input IP address, Subnet, Gateway gotten from your ISP. If using ADSL, please input user name and password,
and click OK. The DVR will connect the server and show “connection succeeds”.
Step2: The following steps are the same as STEP4-7 of the connection way above.
7.2 The remote live preview interface as below:
Fig 7-2 Remote live preview interface
Symbol and function Definitions:
①
Channel
indicator
②
Screen display
mode
③
Volume
④
Snapping
picture
⑤
Start manual record
⑥
Start IE
record
⑦
Bidirectional
talk
⑧
Playback
⑨
Color
⑩
PTZ control
⑪
Master/sub stream
status
Note: click
button to record manual and the record file will be saved in user’s PC.
Screen display mode:
Click the
icon beside the screen display mode, channel select dialog will appear as below:
Fig 7-3 Channel select dialog
Take 8-channel DVR for example: user can tick off channels form 1-ch to 16-ch at random to display the live pictures, 8
channels can be selected at most. Then click OK button to confirm the setting.
Snap pictures
Click “Snap”
icon, the system will automatically capture pictures and save those pictures in the computer.
