DDR-04 / DDR-08-1U / DDR-16-1U User’s Manual
R201302-V08
35
User should set up the save path for those picture in the Remote Preview interface
Configuration
Local
configuration.
Color adjustment:
Drag the slide bar to adjust Brightness, Contrast, Hue, and Saturation. Click Default to reset them to original value.
Buttons
Description
Drag the scroll bar to adjust the brightness of channel
Drag the scroll bar to adjust the contrast of channel
Drag the scroll bar to adjust the saturation of channel
Drag the scroll bar to adjust the hue of channel
Click this button to recover the default value of brightness,
contrast, saturation and hue.
Save the adjustment
PTZ control
Please connect speed dome to the device via RS485 firstly, make sure the protocol of the speed dome is supported by
the device and set the relative parameters manually. User can control the dome up, down, right, left or stop rotating on
Control Center, adjust rotation speed, Iris and zoom, focus on the dome, and set the presets, etc.
Buttons definition:
Buttons
Description
means the dome rotate up. means the dome rotate up left.
means the dome rotate up right
means the dome rotate
down. means the dome rotate left down. means the
dome rotate right down. means the dome rotate left.
means the dome rotate right. means the dome stop rotating.
Drag the scroll bar to adjust rotating speed of the dome.
'Iris' button. Click
button near 'Iris' button to increase light of
the dome. Click
button near 'Iris' button to decrease light of
the dome.
'Zoom' button. Click
button near 'Zoom' button to zoom in the
locale picture of this camera. Click
button near 'Zoom' button
to zoom out the locale picture of this camera.
'Focus' button. Click
button near 'Focus' button to have long
focus. Click
button near 'Focus' button to have short focus.
Go to the Preset
Select and do auto cruise
Track
Auto scan
Click the right mouse on the live interface, a pull-down menu will appear as below
Fig 7-4 right key sub menu
Stream:
this DVR supports master stream and sub stream. Master stream has higher frame rate, max 25FPS
（
PAL
）
/30 FPS
（
NTSC
）
for every channel, but it needs higher network bandwidth simultaneously; second stream has low
frame rate, max 6FPS
（
PAL
）
/7FPS
（
NTSC
）
for every channel, it requires low network bandwidth. Therefore, users
can select the stream according to their bandwidth.
All to master/sub stream:
set all channel to master stream or sub stream.
Enable audio:
enable or disenable audio
Full screen:
the live preview picture will display with full screen, the tool bar will be hided; double click left mouse or
click right mouse to return
