background image

SHD4-755AI_SSD4-742AI Rev11/2007 

SHD4-755AI-B(W)

SSD4-742AI-B(W) 

 

 

Operational Manual 

 

AVAI Dome Series Color Camera 

 
 
 
 

 

 

 

                                                                                     

 

 

 

1/3” Sony Super HAD CCD 

 

550 TV Lines

  SHD4-755AI

 

 

420 TV Lines

  SSD4-742AI

 

 

2.9mm~10.0mm Aspherical Auto Iris IR Lens   

(Made in Japan)

 

 

12V DC 

 

 

 

1. Never point the camera toward the sun   
    Do not expose the lens directly to the sun or to strong light as this may 

damage the pick-up device.   

2. Handle this camera with care   
    Avoid any shock or bumping of the camera. Improper handling could 

damage the camera.   

3. Requires a proper operating environment   

    This camera is designed for indoor use. The allowable temperature range 

for operation of this camera is between -10

C ~ 50

C and the allowable 

humidity is 85%RH maximum.   

4. Clean the front face to the pick-up device   
    It is recommended that the pick-up device surface be cleaned before lens 

installation or whenever the lens is changed. Cleaning should be done by 
using a chamois, a very fine soft cloth, lens tissue, or cotton tipped 

applicator and ethanol to carefully remove any fingerprint or dust. 

5. Check the power source voltage   
    The power source voltage should be within the specified range. (Camera 

must meet the specifications). Camera must be connected to a surge 
protector at all times.   

6. Objects and liquid entry   
    Never push objects of any kind into this camera as this may touch 

dangerous voltage points of short out parts that could result in a fire or 
electric shock. Never spill any kind of liquid on the video product.   

7. Servicing 
    Do not attempt to service this video product by yourself as opening or 

removing covers may expose you to dangerous voltage or other hazards. 
Refer all service to qualified servicing personnel.   

8. Damage requiring service   
    Unplug this video product from the wall outlet and refer service to 

qualified servicing personnel under the following conditions:   

a. When the power supply cord or plug is damaged. 
b. If liquid has been spilled, or objects have fallen into the video 

product.  

c. If the video product has been exposed to rain or water. 
d. If the video product has been dropped or the cabinet has been 

damaged. 

e. When the video product exhibits a distinct change in 

performance. 

 
 
 
 

 

 

OKINA USA Products are covered under warranty for one year from the 
date of purchase. The warranty will automatically be voided if any of the 
following occurs: 
 
1. Camera sticker is removed

 

    If the camera sticker is removed, we will not be able to confirm any 

information regarding when and where the product was purchased. We 
have no other way to verify the purchase record without the serial 

number on the camera sticker; therefore, it should not be removed. 

2.

 

Camera is modified in any way

 

    If the camera is scratched, damaged, or modified in a manner not 

described in this manual, the warranty will be voided immediately. It is 
the customer’s responsibility to keep the camera in good condition. 

3. Video or power cable is cut

 

   

The video cable and the power cable should not be tampered with. 
Cutting or modifying of the cables will result in termination of the 
warranty. 

   

 

                                                                                                                 

Model SHD4-755AI 

SSD4-742AI 

Image Sensor 

1/3” Sony Super HAD CCD 

DSP 

Sony HQ1 

Sony 

Number of Total 
Pixels 

NTSC: 811(H) x 508(V)

PAL: 795(H) x 596(V) 

NTSC: 537(H) x 505(V)

PAL: 537(H) x 597(V) 

Video Output 

1.0Vp-p Composite/75 Ohm 

Resolution 

550 TV Lines 

420 TV Lines 

Minimum 

Illumination 

0.25 Lux @ F1.2 

0.15 Lux @ F1.2 

Signal to Noise Ratio 

More than 50dB 

(AGC OFF) 

More than 48dB 

(AGC OFF) 

Synchronizing System

Internal 

Electronic Shutter   

Speed Mode 

ON/OFF Switchable

 

Back Light 
Compensation 

ON/OFF Switchable 

Auto Gain Control 

ON/OFF Switchable 

Flickerless 

ON/OFF Switchable 

DC Level 

The VR for adjusting the IRIS level of 

Auto Iris Lens 

White Balance 

AWB 2500°K 

9200°K 

Lead Free 

YES N/A 

Lens 

2.9mm~10.0mm Aspherical Auto Iris IR Lens 

Power Supply 

12V DC / 170mA 

12V DC/150mA 

Power Consumption 

2.0W 1.8W 

Operation 
Temperature 

-10°C ~+50°C 

Storage Temperature

-20°C ~ +60°C 

Storage Humidity 

Maximum 85%RH 

Weight 

300g 

Dimensions 

118mm(D) × 88mm(H) 

 

 
 

 

 
 

 
 

 

 

 
 

 

 

 

FEATURES 

SPECIFICATIONS

Optional:  

MB-6D

 

Wall Mount Bracket 

DIMENSIONS (Unit: mm) 

Please read the Operational Manual 
before attempting to use this product.

CAUTIONS 

WARRANTY

 

Reviews: