10
9
Attach handle to smoke chamber lid and firebox lid using eight 1/4-20×½" screws and 1/4-20 flange nuts. Tighten securely.
Smoke Chamber handle
shown installed.
Smoker Chamber
1/4-20
Flange
Nuts
1/4-20x1/2" Screws
10
Attach smokestack to end of smoke chamber by
sliding stack into smokestack mounting bracket. While
holding the smokestack in a vertical position, tighten
the 3/8-16×1" hex-head bolt. Then slide the side
handle into the brackets welded to smoke chamber.
Install two 1/4-20x1/2” Hex Washer Head bolts into the
ends of the handle as shown.
TIGHTEN THE BOLTS
SECURELY!
3/8-16x1”
Hex Head Bolt
1/4-20x1/2”
Hex Washer Head Bolts
TIGHTEN SECURELY!
Smoke Stack
Pull Handle
GB
