Chapter 2 Routine Maintenance
18
Document Version V1.1.2 (19/09/2022)
2.
Do not use it in an environment where it is in direct contact
with water, solvents, oils, acids, ultraviolet rays, ozone, etc. In
particular, do not allow oil to adhere to the belt, otherwise it
will cause the belt to swell and significantly shorten the
service life of the belt.
3.
Please avoid using or storing in extremely high or low
temperature, humid environment that exceeds the operating
temperature range
4.
During installation, maintenance and inspection, be sure to
cut off the power supply and confirm that the machine is in a
completely stopped state before proceeding with the work.
