Oko Android MIYOTA 1L22, Warranty/Instructions/Registration

ETA G10

Features: 30 minute laptimer with 1/10th second, date.

Setting the time:

1) Pull crown out to 3rd position and adjust until the correct time is displayed.

2) Push crown back in to the 1st position for normal operation.

Setting the date:

1) Pull crown out to 2nd position and adjust until the correct date is displayed.

   *(Do not adjust the date between 9:00pm and 2:00am – the date wheel may 

   be damaged-NOT COVERED BY WARRANTY)

2) Push crown back in to the 1st position for normal operation.

Setting the chronograph second hand to zero:

1) Pull crown out to 2nd position.

2) Push button B to advance the chronograph second hand until it reaches   

     zero.

3) Push crown back in to the 1st position for normal operation.

Setting the chronograph 1/10th second hand to zero:

1) Pull crown out to 2nd position.

2) Push button A to advance the chronograph 1/10th second hand until it 

    reaches zero.

3) Push crown back in to the 1st position for normal operation.

Setting the chronograph 30 minute hand to zero:

1) Pull crown out to 3rd position.

2) Push button A to advance the chronograph minute hand until it reaches 

    zero.

3) Push crown back in to the 1st position for normal operation.

Chronograph operation:

1) Push button A to start and stop. 

2) Push button B to reset.

Split-time chronograph operation:

1) Push button A to start.

2) Push button B for split time. 

    Now you have measured the first interval of time. 

3) Push button B to release split time.

    This is the entire period of time. Repeat section 2 for multi-intervals.

4) Push button A to stop.

5) Push button B to reset.

1 2

Minute

Second

3

31

1/10th second

A

B

       (22)

                                                                                                                     (23)