ETA G15 RETROGRADE
Features: 60 minute laptimer, date.
Dial display:
-10 o’clock position displays chronograph minute with 5 minute increment .
-2 o’clock position displays chronograph minute with 30 second increment.
-6 o’clock position displays regular small second.
Setting the time:
1) Pull crown out to 3rd position and adjust until the correct time is displayed.
2) Push crown back in to the 1st position for normal operation.
Setting the date:
1) Pull crown out to 2nd position and adjust until correct date is displayed.
2) Push crown back in to the 1st position for normal operation.
Setting the chrono-second to 9 o’clock position:
1) Pull crown out to 3rd position.
2) Push button A to advance the chrono-second to 9 o’clock.
3) Push crown back in to the 1st position for normal operation.
Setting the chronograph minute (30 sec increment) to zero:
1) Pull crown out to 3rd position.
2) Push button B to advance the chronograph minute (30 sec increment) to
zero.
3) Push crown back in to the 1st position for normal operation.
Setting the chrono-minute (5 minute increments) to zero:
1) Pull crown out to 2nd position.
2) Push button B to advance the chrono-minute (5 minutes increments) to zero.
3) Push crown back in to the 1st position for normal operation.
Chronograph operation:
1) Push button A to start and stop.
2) Push button B to reset.
Split-time chronograph operation:
1) Push button A to start.
2) Push button B for split time.
Now you have measured the first interval of time.
3) Push button B to release split time.
This is the entire period of time. Repeat section 2 for multi-intervals.
4) Push button A to stop.
5) Push button B to reset.
1 2
60 Minute
Second
3
31
5 Minute
A
B
(24)
(25)
