MECHANICAL MOVEMENT
MIYOTA 8205, 8215
Features: Day/date. Date.
Setting the time:
1) Pull crown out to 3rd position and adjust until the correct time is displayed.
2) Push crown back in to the 1st position for normal operation.
Setting the day:
1) Pull crown out to 2nd position and adjust until the correct day is displayed.
2) Push crown back in to the 1st position for normal operation.
Setting the date:
1) Pull crown out to 2nd position.
2) Turn crown counter clockwise to correct date.
3) Push crown back in to the 1st position for normal operation.
Care and maintenance:
* The automatic movement can be wound by either the crown or the rotor.
* To restart an automatic movement after not wearing it for a period of time,
it is best to wind it manually via the crown, approximately 25 revolutions.
Important facts:
* The rotor turns counter clockwise for winding.
* The rotor turns a maximum of 650 revolutions per day.
* A full charge offers approximately 36 hours of power.
* Do not adjust date, day and month wheel between 9:00pm and 3:00am
The date wheel is extremely delicate and may be damaged during this time
period. (NOT COVERED UNDER WARRANTY)
1 2 3
SUN 31
1 2 3
31
MIYOTA 8245
Features: sub second.
Setting the time:
1) Pull crown out to 2nd position and
adjust until the correct time is displayed.
2) Push crown back in to the 1st position
for normal operation.
MIYOTA 8247
Features: sub second, military time.
Setting the time:
1) Pull crown out to 2nd position and
adjust until the correct time is displayed.
2) Push crown back in to the 1st position
for normal operation.
SKELETON: 8N24, 2824, 2189, 2807
Features: skeleton.
Setting the time:
1) Pull crown out to 2nd position and
adjust until the correct time is displayed.
2) Push crown back in to the 1st position
for normal operation.
1 2
1 2
Second
Second
GMT
1 2
(42)
(43)
