6
−
VENTILATION, unit should be situated so that its location or position does not interfere with
proper ventilation. Neither the gas mixer nor stream destinations should be in poorly ventilated
areas.
−
Unit should be situated away from heat sources such as open flames, radiators, heat registers,
stoves, or other appliances or processes that produce heat.
−
Do not start up the equipment if the supply cable is damaged.
−
Connect the equipment only to grounded mains power socket.
−
Do not disconnect cables while in operation.
−
Do not open the unit. Do not remove cover or back.
−
Prevent metal fragments or lead wire scraps from falling inside instrument to avoid electric shock,
fire or malfunction.
−
No user serviceable parts inside.
−
Before starting, assemble the equipment far from electric device.
−
Unit should never be used where it can fall or be pushed into water.
International caution symbol marks this device. It is important to read the “Safety Notes” before
installing, using and commissioning this device, as the notes contain important information relating
to safety and EMC. Not following these instructions can result in damage or breakdown of the device
and its accessories.
We reserve the right to make technical variations.
IN NO EVENT SHALL OKOLAB S.R.L. BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE
OF ANY PRODUCT.
