5
Product Description
FUNCTION DESCRIPTION
The accumulator is installed between power sources and energy consumers.
It absorbs the energy when it is available and holds it in readiness for when it is nee-
ded.
One or more power sources provide the accumulator with energy. One or more con-
sumers draw energy from the accumulator.
The accumulator can be used for energy management and storage for solar systems
and pellet heating systems.
The POWER SOURCES
Solar
The solar system supplies the accumulator with energy by means of solar heat
exchangers.
Pellematic pellet boiler
The pellet boiler supplies the accumulator with energy by means of water exchange.
The pellet boiler needs a storage tank to achieve a minimum burner running time. If
the operating periods are too short, the efficiency of the boiler is reduced and the
boiler is soiled unnecessarily.
The ENERGY CONSUMERS
Heating
The heating system draws energy from the accumulator using the temperature differ-
ence between flow and return.
Hot water
The hot water system draws energy from the accumulator either via a DHW flow heat
exchanger or an external fresh water module.
Secondary return line
The secondary return line pre-heats the domestic hot water, while drawing the energy
required from the accumulator.
It is particularly important to minimise the running times of the return pump to the
greatest possible extent to prevent unnecessary energy losses.
Use timer-controlled and temperature-controlled return pumps.
12
5 Product Description
Installation manual
Summary of Contents for 600
Page 1: ...Installation manual Accumulator 600 2000 liter ENGLISH PE590 EN...
Page 30: ......
Page 31: ......
Page 32: ......
