148
IP Config
Activate optionally the
Ping
function.
To prevent the modem from switching into
standby mode, a ping command is executed
every 10 minutes.
You get the data from your network technician.
This menu item is only active when a compatible USB wireless adapter is connected.
(not every wireless stick works with the Touch operating device)
By default, this item is hidden and located in LAN mode.
If the wireless mode is enabled, a password box appears.
Dynamic address assignment on the local network (should be disabled if possible).
If a WLAN stick is recognized and supported, an Additional LAN & WLAN button
appears.
Password of router.
Address extension with which the touch remote control is accessible.
In principle, you can make your own choice, certain ports are associated with spe-
cial services, e.g. 25 Mail, 80 Web and so on.
The ping prevents the internet connection from beeing closed by the router.
Therefore a query to the ÖkoFEN server is started at certain time intervals.
So the router detects that the connection is still active.
Automatic:
This will attempt to automatically set up the router using the UPNP
protocol port forwarding.
If this service is disabled on the router or doesn’t work properly, it is
canceled accompanied by an appropriate error message.
As this function is time-consuming (may take a few minutes), it is
running in the background. Whatever the UPNP
If available, the Touch operating device registers on the ÖkoFEN re-
mote control server with it’s current external IP Address.
In case of change of address by the external provider, this is detected
and sent to the server Ökofen.
Manual:
In this mode, the port forwarding must be set manually. (for lack of
UPNP)
PE 567 EN 1.1
Summary of Contents for PE 08
