background image

14

trouble and
countermeasure

Microphone 
does not work                

Sound
distortions                

Dull sound             

The power supply unit
or mixing console is not 
connected to the mains.

The microphone is not 
connected to the power 
supply unit or the power 
supply unit is not 
connected to the mixing 
console.

The input sensitivity or 
preamplification of the 
subsequent amplifier
is incorrectly adjusted.

Transmission of the body 
noise.

The polar pattern is not 
taken into account.

Decrease the input sensitivity 
or preamplification of the 
subsequent amplifier
in such a way that there
is enough modulation 
reserve.

The mixing console or 
the power supply unit
is not turned on.

Check the connection
to the mains.

Check that the cables are 
correctly connected from
the microphone to the power 
supply unit and from the 
power supply unit to the 
mixing console (see page 9).

Check the corresponding 
buttons of the mixing 
console and power supply 
unit.

Use a suitable shock mount 
(page 9).
                

Check that the microphone
is installed correctly.
The microphone must be 
pointed at the sound source.

                

Condition              

Causes

Corrective action

Summary of Contents for MKL-111

























Reviews: