Owners Handbook
8 |
P a g e
•
Remove the green dust plug in the adjusting hole at the rear of the brake drum. It is
situated in the backing plate of the hub assembly.
•
Put a small flat screwdriver through the adjusting hole and click the adjusting nut while
you are rotation the wheel in a forward direction.
•
Click the adjusting nut until the wheel stops turning.
•
Then click the adjusting nut in the opposite direction until the wheel turns freely. This
should be approximately 5 clicks.
•
At the centre equalizer bracket, take up the slack on the brake cables and centre rod by
adjusting the adjusting nuts and make sure the equalizer bracket is straight once done.
•
Pull the centre rod away from the coupling and check that there is 5mm play between
the centre rod adjusting nut and the equalizer bracket.
•
Now lock the all the lock nuts for the brake cables and centre rod.
•
Make sure that the centre rod support bracket at the front of the caravan is not bent
and the cable can move freely.
Summary of Contents for Gravellor En-Suite
Page 1: ...Owners Handbook 1 P a g e...
