English
Destudding
Gun
PS-01
5 Operation of the gun
5.1 Elimination of studs
Press the gun with the claws (36) into the tire rubber over a stud. Operate the
trigger (7) and keep it pressed. The claws close and seize the stud. Then the
gun is pushed off the tire with the push-off plate (25) and the stud is pulled out
of the tire. Release the trigger as soon as the stud has been fully pulled out of
the tire. The push-off plate returns, the claws open, the extracted stud is set
free and can be disposed of.
Attention!
Do not hold the gun with the hand in the area of the
push-off plate. There is danger of violent pressure!
Counsel!
When impressing the gun above the stud a certain
counter pressure has to be put by hand to the tire
rubber. With some practice and skill you will soon
find out the correct pressure in order to obtain a
steady working result.
OKU GmbH, 73650 Winterbach, Germany
10
