4345-E P-35
SECTION 10 PARAMETER SETTING
OPERATING REPORT CLEAR DAY
•
Explanation
If the date of today agrees with the date set for "OPERATING REPORT CLEAR DATE", the
period operating report in the memory is cleared when the NC is turned on.
•
Setting
Ten characters (fixed)
If the number of digits of a number used to express the month or day is not two, prefix "0" to the
number.
USE NOT OPERATING ITEM FOR AUTO DECISION
TIME ALLOWED BEFORE DETERMINING NO OPERATOR PRESENT
•
Explanation
If you set [YES] for "USE NOT OPERATING ITEM FOR AUTO DECISION", the reasons for not-
operating status are automatically determined as follows:
•
If a key on the NC operation panel has not been pressed for the period set for "TIME
ALLOWED BEFORE DETERMINING NO OPERATOR PRESENT", the reason for not-oper-
ating status is changed to "NO OPERATOR". Note that this automatic change is made only
when the current reason is "IN-PRO SETUP".
•
If a key on the NC operation panel is pressed, the reason for not-operating is automatically
changed to "IN-PRO SETUP". Note that this automatic change is made only when the cur-
rent reason is "NO OPERATOR".
•
Setting
Eight characters (fixed)
If the number of digits of a number used to express the time is not two, prefix "0" to the number.
Examples:
1999/07/30
Acceptable
1999/7/30
Not acceptable
Examples:
08:59:00
Acceptable
8:59:00
Not acceptable
