Page
7
of
11
6.
Now use the
Right
Button to scroll across to the
Sensor Selection
. This should be
Automatic
.
If the Automatic does not work, scroll to
Mode,
and manually select type of sensor with
the
Right
Button.
7.
Sensor Offset
.
How far from the bottom of the tank is
the sensor positioned? Enter this here.
As standard we would recommend
50mm
which is
0.050m
.
Sensor Span.
As Standard, this comes
set for
2.55m
. Change this to suit the
sensor range you have. Curser Confirm
YES.
8.
Toggle the Calibration switch.
The Gauge returns to Standard
Readings.
4.
You
MUST
scroll
YES
and use the
“
Hidden
” Button to confirm
YES
for all
screens
5.
Now use the
Right
Button to scroll
across to
Alarm Trigger Points
and
Specific Gravity
settings.
Sensor Offset
Sensor Span
C22 = 2.55m
C23 = 3.0m
C25 = 5.0m
C27 = 10.0m
