Oleo-Mac BC 22 TR Operators Instruction Book Download

Page: 28 / 246

the table.

16 - All labels with health hazards must be kept

in good conditions. In case of damage or
deterioration, immediately substitute them
(Fig. 25).

17 - Do not utilize the machine for uses

different from the ones specified in the
manual (see pag. 29).

18 - Never leave the machine unattended with

the engine running.

19 - Do not start the engine with the arm not

mounted.

20 - Check the brush cutter daily to be sure that

components and safety devices are full
functioning properly.

21 - Do not attempt to carry out operations

or repairs that are not part of the normal
maintenance. See the authorised dealer.

22 - When disposing of the machine at the

end of its useful life, think of the
environment. Take your old unit to your
dealer who will be able to dispose of it in
a proper manner.

23 - Only experienced persons who are

familiar with the operation and safe use of
this machine should use it. If you lend the
blower to someone, also give them the
instruction manual and ensure that they
read it before using the machine.

24 - All saw service, other than the operations

shown in the present manual, should be
performed by competent personnel.

25 - Keep this manual on hand and consult it

before each use of the tool.

WARNING

Never use a machine with faulty safety

e q u i p m e n t . T h e m a c h i n e ’ s s a f e t y

e q u i p m e n t m u s t b e c h e c k e d a n d

maintained as described in this section. If

your machine fails any of these checks

contact an Authorised Service Centre to

get it repaired.

Any use of the machine not expressly

envisaged in this manual is to be

considered improper and therefore a

source of risk to people and property.

WARNING:

National regulations may limit

the use of the machine.

1 - Do not operate the machine unless you

have received specific instruction on its use.
First time users must familiarise themselves
thoroughly with the operation of the
machine before working in the field.

2 - The machine must only be used by adults

in good physical condition who are familiar
with the operating instructions.

3 - Never use the brush cutter when you are

tired or fatigued or if you have taken alcohol,
drugs or medication.

4 - Wear appropriate clothing and safety articles

such as: boots, heavy-duty trousers, gloves,
protective eyewear, ear protection and
protective helmet. Use clothing which is
close-fitting but comfortable.

5 - Do not allow children to use the brush cutter.
6 - Do not allow other people to remain within

15 metres during brush cutter use .

7 - Before using the brush cutter, make sure

that the blade fixing bolt is well-tightened.

8 - The brush cutter must be equipped with

the cutting accessories recommended by
the manufacturer (look pag. 38).

9 - Never use the brush cutter without the blade

guard or the head.

10 - Before starting the engine, make sure that

the blade is free to move and is not in contact
with any foreign objects.

11 - Every now and then while working, stop

the engine and check the blade. Replace it
at the first sign of cracks or breaks.

12 - Only use the machine in well-ventilated

places, do not use in explosive or flammable
atmospheres or in closed environments.

13 - Never touch the blade or attempt any

maintenance work while the engine is
running.

14 - It is prohibited to fit any device other than

that supplied by the manufacturer.

15 - Do not use a machine that has been

damaged, badly repaired, improperly
assembled or modified. Do not attempt to
remove or bypass any of the safety devices.
Only use cutting attachments indicated in