Page 50
DH1 BASE UNIT / DH2 WIRELESS GATEWAY
USER GUIDE
6.
Check map to integer or float point table or both
7.
Double-click DH1 Base Unit or secondary gateway
8.
Click on Imports tab to confirm the point(s) was shared
9.
The point(s) is automatically mapped to its Modbus register holding
table on DH1 Base Unit or secondary Gateway
10.
Using shared point based on interval or on change
a.
Double-click primary Gateway
b.
Click on Exports tab
c.
Right-click on point and select Interval
d.
If time value equals 0, then the point will be shared on change
i.
On change means the value changed or new RF packet
received
e.
If a point is set to a specific interval, then the Gateway will send
the point according to the interval regardless change in value
11.
Save project file
12.
Update both Gateways for changes to take into effect
Controlled Copy
