Page 65
DH3 WIRELESS GATEWAY
USER GUIDE
33.
MAPPING AN IMPORT TO AN OUTPUT ON
WIRELESS MULTI-I/O MODULE
Although the DH3 is not equipped with any onboard analog or digital
outputs, however, any import point can be mapped to an available output
in the same network whether it be to a Base Unit, Wireless Multi-I/O
Module, or another device with outputs.
An import point can also be a function created by a Modbus Write function
so that the point can be written by a third-party Master device such a RTU
or PLC.
1.
Create a Modbus Write function
see sec. 30
2.
Click on DH3 in project file and use + button to add a Wireless Multi-
I/O Module to the system
3.
Configure settings for the Wireless Multi-I/O Module
a.
Double-click on any input or output to configure parameters
