Page 69
DH3 WIRELESS GATEWAY
USER GUIDE
8.
Click Modbus Inputs tab and configure input settings
a.
Refer to Modbus Mapping table
9.
Click Modbus Outputs tab and configure output settings
a.
Refer to Modbus mapping table
10.
How to map inputs reads to DH3’s Modbus register holding table
a.
Double-click on Gateway in the Project Tree
b.
Click on “Imports” tab
c.
Right-click over import points and select paste to Integer or float table
d.
Select “Modbus” tab and verify Modbus register mapping