POWER SUPPLY CIRCUIT
The board is power supplied from POWER connector pin 1 and pin 2 with 9-12 V
DC.
RESET CIRCUIT
AVR-H128-CAN
reset circuit includes pin 6 of JTAG connector, pin 5 of ICSP
connector, Extension connector CON2 – pin 4 and AT90CAN128 pin 20.
CLOCK CIRCUIT
Quartz crystal 16MHz is connected to
AT90CAN128
pin 23 (XTAL2) and pin 24
(XTAL1).
Quartz crystal 32kHz is connected to
AT90CAN128
pin 18 (TOSC2) and pin 19
(TOSC1).
JUMPER DESCRIPTION
EPWR
Enable target power supply.
Page10
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from