LEDS:
In normal mode the GREEN LED is on whenever the RF antenna circuit is
active and scanning for RFID tags. The RED LED switches on whenever a
valid RF TAG ID is being scanned and decoded successfully.
The LEDs can be switched off to save power consumption. See the
“Command Line Interface” section for more information.
In boot loader mode the LEDs have other meaning. See the “Firmware
Upgrade” section for more information.
PC DRIVER INSTALLATION:
Drivers for the USB HID mode are integrated in Windows XP/Vista.
The driver for USB CDC mode is available from our website. Windows
installation steps are the following:
1.
Download and unzip the file “MOD-RFID125-drivers.zip” in a
temporary directory.
2.
Plug the programmer in the USB port.
3.
Point the Device Wizard to the temporary directory.
4.
Windows will complain that drivers are not signed. Click “Continue”.
5.
Click finish.
Screen shots of the steps are shown below:
Summary of Contents for MOD-RFID125
Page 3: ... HyperTerminal or other terminal program ...
Page 6: ......
