Olimpia splendid Arcadia PANORAMICA, Instructions For Installation, Use And Maintenance Manual

9

STARTING UP

· The appliance must only be started up after the mounting operations and the connection of the smoke evacuation ducts have been
completed. On a new appliance, the paintwork finish needs to be completely dried out, therefore we recommend that you carefully follow
the instructions below when first using the appliance:

-

When first using, the appliance could emit odours which might be unpleasant; we recommend that you ventilate the room to eliminate
these odours;

-

The paint on the appliance is only completely hardened after it has been used several times.

· The cooker is a an appliance whose functions comply with the EN 12815 norms; thanks to the cast iron structure of the firebox there

is a great thermal efficiency. The covering is in enamelled steel sheet and in the "Visible" versions, the upper doors of the oven and
firebox have a ceramic glass so you can see the flame and the food being cooked inside the oven. The basic versions have the smoke
outlet on the right while in left-hand versions have the positions of the firebox and the oven inverted with the smoke outlet on the left.

LOADING THE FUEL

· The appliance functions intermittently and therefore it needs to be fuelled up manually while it is operating;
· Perform the refuelling when the flame is low to avoid any unpleasant spillage of burnt product from the firebox door.
· To open the firebox door, use the tool supplied with the appliance.

LIGHTING AND USE

N.B. To light the stove, never use: alcohol, petrol or other inflammable liquids.

· When lighting up on a very cold day or with low pressure it is advisable to heat the flue by burning some newspaper in the stove.
· When adding fuel with the stove burning, always keep to the quantities indicated in the "Technical data" table.

8

METHANE

2,5 kg

1 kg

1 m

3

2.4

2.5

2.6

=

=

5

4

3

2

1

0

0

10

20

30

40

50

60

70

80

90

100

WOOD ENERGY DEPENDING ON

HUMIDITY

Relative humidity %

Heat power

 (kWh/kg)

2