CALDO ROCK
ENGLISH
EN- 5
7. Before connecting, make sure that the plate data
corresponds with the mains electrical supply.
The data plate is located on the appliance.
8. Install it according to the manufacturer’s
instructions An incorrect installation can cause
damage to people, animals or property for which the
manufacturer accepts no responsibility.
9. Always and only use it in a vertical position.
10. Always unreel the cable completely during use.
11. The appliance is equipped with a power cord with
plug (Y-type connection).
If the power cord is
damaged, it must be replaced by the manufacturer,
his technical service or a similarly qualified person
in order to eliminate all possible risks.
12. Install it in such a way that the switches and other
controls cannot be reached by persons using the
bath or shower.
13. Do not use extensions, if not with particular care.
14. Keep the appliance at a distance of at least 50cm
from other objects (fig. 1).
15. Do not place appliance close to a radiant heat
source.
16. Do not use the appliance to dry clothes.
17. Do not insert or allow foreign objects to enter any
ventilation or exhaust opening, as this may cause
an electric shock, fire or damage to the appliance.
18. Do not allow cord to come in contact with heated
surfaces during operation.
19. Do not run cord under carpeting, throw rugs or
runners etc. Arrange cord away from traffic areas
so that it will not be tripped over.
