CALDO ROCK
7
8
ENGLISH
EN- 13
• Make sure that curtains or other objects do not obstruct the air flow (fig. 3).
• Leave at least 150cm of free space on the sides,
behind the appliance and above it (fig. 1).
• Make sure the knob (7) is set to “
O
” (only for “
M
”
and “
O
” versions)
• Connect the plug to the power socket.
• Make sure the mains data
correspond to what is
described on the data plate of the appliance.
• Arrange cord away from traffic areas so that it
will not be tripped over.
3 - USE
(“M” and “O” versions)
Knob “7”
• Knob set to “
O”
:
appliance OFF
• “
VENTILATION
” function :
rotate the knob to “ ” position.
• “
MINIMUM POWER
” function :
rotate the knob to “
•
” position.
• “
MAXIMUM POWER
” function : rotate the knob to “
•
•
” position.
Knob “8” - Thermostat
• Start the appliance by rotating the knob (7) to “
•
” position or to “
•
•
” position.
• To set the room temperature to a specific value (thermostatation), rotate the knob
“8” clockwise until it stops.
• Once the desired temperature of the room has been reached, slowly rotate the
knob “8” anticlockwise until the appliance switches off.
• At this point, the appliance will reactivate automatically when the room
temperature lowers beyond the set limit and will switch off again once the room
temperature reaches the set value.