“M” - “O”
“DT”
ENGLISH
EN- 16
5 - OVERHEAT PROTECTION
•
This heater is protected with overheat protection that switches off the appliance
automatically in case of severe overheating
In this case:
- unplug the appliance;
- wait about 30 minutes for it to cool;
- remove any possible cause of overheating, eg. something covering the
heater;
- check for damage to the appliance, the cord and the plug.
If there is no damage:
- plug the unit back in;
- switch it on as described above.
If the heater still does not turn on, please contact Customer Service for
assistance.
6 - SAFETY CONTROL (ANTI-OVERTURNING SWITCH)
•
If the appliance falls or overturns, the anti-overturning switch is activated and
automatically turns it off.
•
For the “
M
” and “
O
” versions, the heater will start working as normal again
after put to the upright position.
•
For the “
DT
” version, need to reset on the control panel again to get the
heater working.
