OPERATION:
- Turn the thermostat knob clockwise until reaching maximum temperature.
- Operation in Summer (fan only): Turn the to the position « ».
- Heating to middle power: turn switch (right) to position I (1000W).
- Heating at full power: turn switch (right) to position II (2000W).
- Turn the switch to “0” position to switch off the heater.
ADJUST THERMOSTAT:
Once the room temperature is reached, slowly turn the thermostat knob in the direction
of anticlockwise until you hear a click and then the heater will stop working. The heater
will turn on and off automatically to maintain the room temperature you have set.
CLEANING AND MAINTENANCE
Always disconnect the appliance and remove the plug before any maintenance.
Clean frequently air intake and exhaust air grilles.
Never use any solvents for cleaning!
Your heater is fitted with two safety devices to switch off the heater in the event of
overheating. If a safety device activates, please turn the heater off, unplug the appliance
and let it completely cool, clear any blockages of the air inlet or outlet before attempting
to restart the heater.
If the heater fails to operate, or the safety device switches the heater off again, return
the heater to your nearest service center for examination or repair.
