45
e) Hook the appliance to the upper part of the plate (fig. 7)
in such a way that the lower part may be lifted.
f)
Pass the external unit connecting wires inbetween the
motor and the electronic card casing and connect them
up to the connecting terninal board (fig. 8) in accordance
with the modes indicated in the electric circuit
arrangement (see paragraph 3.7).
g) Place a stopper between the appliance and the wall (fig.
9) to create sufficient space for the cooling and conden-
sate connections to be carried out according to the
modes specified in paragraph 3.5 and 3.6.
Fig. 7
Fig. 9
Fig. 8
SOLUTION WITH POWER
SUPPLY FROM THE OUTSIDE
SOLUTION WITH POWER
SUPPLY FROM THE INSIDE
